[1] H.P. Lenz; ST. Prüller; R. Rosenitsch; Transport emissions in EU-15; ACEA Official Publications; 2002 [2] H. Schulte, M. Wirth; Internal Combustion Engines for the Future; ACEA Official Publications; 2002
[3] JCAP I Overview and JCAP II Plans October 9 10, 2002 JCAP Promotion Dept., PEC Yoshiaki Shibata Further Challenge in Automobile and Fuel Technologies For Better Air Quality
[4] B. Otterholm; Engine oils for Euro 4 Engines and Beyond – Need for Low Sulphur, Phosphorus and Sulphated Ash; 14th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2004, p. 37-43
[5] R. J. C. Biggin; Additives – Present State and Future Developments; 14th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany;
January 13-15, 2004; p. 31-36 [6] 70/220/EEC Európai Uniós direktíva
[7] J. A. Mc Geehan; Diesel Engine Oils for a New Era of Low Emission Vehicles: Status of Oil Category for 2007; 14th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2004; p. 31-36
[8] A. Hertzenberg, W. Moermann, S. Mueller-Lunz, N. Pelz, G. Wenninger, W. H. Buck, W. A. Givens, A. Jackson, A. Kaldor; Evaluation of Lubricant Compatibility with Diesel After-Treatment Devices; 14th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2004; p. 1283-1297
[9] Dr. Hancsók Jenő; Korszerű Motor és Sugárhajtómű Üzemanyagok, I. Motorbenzinek; Veszprémi Egyetem Kiadó; 1997; ISBN 963 7332 74 X [10] Dr. Hancsók Jenő; Korszerű Motor és Sugárhajtómű Üzemanyagok, II. Dieselgázolajok; Veszprémi Egyetem Kiadó; 1999; ISBN 963 9220 27 2 [11] Kalmár István, Stukovszky Zsolt; Belsőégésű Motorok Folyamatai; Műegyetemi Kiadó, 1998; ISBN 963 420 565 8
[12] Monitoring of ACEA’s Commitment on CO2 Emission Reductions from Passenger Cars; Joint report of Automobile Manufacturers Association and the Comission Services;
ACEA Official Publications; 2002
[13] C. Delarue; Reduce EMISSIONS and CO2, RENAULT Toulouse June 2004 [14] K. KATO; OEM Perspective SAE Fuels and Lubricants Meeting Toulouse June 9, 2004 [15] Emissions1 – combustion chemistry; Toyota Motor Sales, USA
[16] ACEA programme on emissions of fine particles from passenger cars (2); ACEA Official Publications; 2002
[17] ACEA Oil Squebnces. Service Fill Oils for Gasoline Engines, Light Duty Diesel Engines, Engines with Aftertreatment Devices and Heavy Duty Engines, ACEA Official Publications; 2004
[18] H. Bockhorn; Soot Formation and Oxidation; C. Vovelle (ed.), Pollutants from Combustion, 2000 Kluwer Academic Publishers. Printed in the Netherlands; p. 205-239 [19] N.M. Marinov, W. J. Pitz, C.K. Westbrook, M. J. Castaldi and S.M. Senkan; Modelling of Aromatic and Polycyclic Aromatic Hydrocarbon Formation in Premixed Methane and
Ethane Flames; Combust. Sci. And Tech. 1996, vols. 116-117, pp. 211-287
[20] P. Leduc, B. Dubar, A. Ranini, G. Monnier; Downsizing of Gasoline Engine: an Efficent Way to Reduce CO2 Emission.; Oil & Gas Science and Technology – Rev. IFP, Vol 58 (2003), No. 1, pp. 115-127
[21] Gerhard Lepperhoff; Cleaner Cars: Innovative Solutions to Reduce CO2; European Comission Community Research, Brussel, 2002
[22] R. Gligorijevic, J. Jevtic, D. Borak; Impact of Lubricant Oil on Particulate Emission of Diesel Engine; 14th International Colloquium Tribology and Lubrication Engineering;
Stuttgart/Ostfildern, Germany; January 13-15, 2004; p. 1599-1604
[23] G. E. Totten, Steven R. Westbrook, Rajesh J. Shah; Fuels and Lubricants Handbook: Technology, Properties, Performance and Testing; ASTM Manual Series: MN237WCD;
ISBN 0-8031-2096-6
[24] T. W. Selby; Sulfur Emissions from Engine Oil – Information from the Sulfur Index; 14th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2004
[25] T. W. Shelby; Development and Significanceof Phosphorus Emission Index of Engine Oils; 13th International Colloquium Tribology and Lubrication Engineering;
Stuttgart/Ostfildern, Germany; January 13-15, 2002; p. 1445
[26] ACEA data of the sulphur effect on advanced emission control technologies; ACEA Official Publications; 2000
[27] Inoue K., Kurahashi T., Negishi T., Akiyama K.; Effects of Phosporous and Ash Contents of Engie Oils on Deactivation of Monolithic Three-way Catalysts and Oxygen Sensors, SAE paper 920654
[28] Ueda F.; Sugiyama S., Arimura K., Hamaguchi S., Akiyama S.; Engine Oil Effects on Deactivation of Monolithic Three-Way Catalyst and Oxygen Sensors, SAE Paper 940746 [29] Culley S.A., McDonell T.F., Ball D.J.Kirby C.W.; The Impact of Passenger Car Motor Oil Phosphorous Levels on Automotive Emission Control Systems, SAE paper 961898 [30] Gotta L., Natoli G., Salino P., Barr T., Boyer M.; How Modern Engine Oils Can Impact on Emission Reduction, SAE paper 2003-01-1964
[31] Dr. Valasek István; Tribológiai Kézikönyv; Tribotechnik Kft.; Budapest; 1996; ISBN 9630298368
[32] M. Ribeaud, M. Weismiller, M. E. Gande; Volatility of Phosphorous Containing Anti-Wear Agents for Motor Oils; 14th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2004; p. 1579-1584
[33] S. Korcek, M.D. Johnson, R. K. Jensen, C. McCollum; Retention of Fuel Efficiency of Engine Oils; 14th International Colloquium Tribology and Lubrication Engineering;
Stuttgart/Ostfildern, Germany; January 13-15, 2004
[34] J. A. Mc Geehan, W. Alexander III, M. C. Couch Jr., J. A. Rutherford, S. H. Roby; Lubricants That Optimize Diesel Engine Fuel Economy and Allow Extended Oil Drains; 13th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2002; p. 1403-1418
[35] Dr. Deák Gyula; Kőolajipari fogalmak; Veszprémi Egyetem Kiadó, 1995 [36] Kántor István; Kenéstechnikai ABC; Mol Rt. Kenőanyag üzletág Komárom 1996
[37] T. W. Selby, „The World of Engine Oils and Their Properties”, International Colloquium, Tribology 2000; January 14-16, 1992 Vol. 11, Paper 14 [38] A.M. Kulijev, Kenőolaj- és üzemanyag adalékok kémiája és technlógiája; Műszaki Könyvkiadó; Budapest; 1975; ISBN 963 10 1196 8
[39] Jolie, R.M.: Laboratory Screening Tests for Lubricating Oil Detergents and Dispersants. Fifth World Pertoleum Congress. New York, 1959. Sect. V. 307-318 [40] Kamio, S. : Evaluation of Diesel Engine Oil by Panel Coking Test. Japanese National Railway. Quaterly reports. 1969.1.
[41] Petroleum Chemistry, Elsevier, 2000
[42] H.A. Barnes, J. F. Hutton, K. Walters; Bevezetés a reológiába; Veszprémi Egyetem Kiadó, 1993 [43] M. TEN BOSCH: Gépelemek, Műszaki Könyvkiadó, Budapest, 1957.
[44] Ferencz M., Nagy R.-né; Gépi vizsgálatok a kenőanyag-fejlesztésben; MOL Szakmai Tudományos Közlemények; 1993/2; p. 150-158
[45] G. Kis, L. Bartha, J. Baladincz; PIB-Polysuccinimide Type Additives With Complementary AF and AW Effect, Technische Akademie Esslingen, 13th International Colloquium Tribology, January 15-17, 2002
[46] Dr. Valasek István; A tribológia szerepe a kenőanyag-fejlesztésben. MOL Rt. Szakmai Tudományos Közlemények, 1993/1, p. 46-58
[47] H. Hölscher, U. D. Schwartz; Friction at the Nanometer-Scale – Nanotribology Studied with the Atomic Force Microscope; 13th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2002; p. 829-834.
[48] herer, E. Kullenberg, U. Rabe, W. Arnold; New Perspectives of Microtribology – Methods and Application; 13th International Colloquium Tribology and L ; Stuttgart/Ostfildern, Germany; January 13-15, 2002; p. 807-814.
[49] J , K. M. Delargy, A. M. Seeney; The Composition and Structure of Model Zinc Dialkyldithiophosphate Anti-wear Films; 18th Leeds/Lyon Symposium on Tribology,
“ ear Particles: From the Creadle to Grave”; Lyon; France; Sept. 1991
[50] zimina, The assesment of ZnDTP Tribochemical Reactivity by Electroch ical Simulation, Lubrication Science Vol. 13 No. 1 November 2000; ISBN 0954-0075 [51] A. M. Barnes, K. D. Bartle, V. R. A. Thibon; A review of zinc dialkyldithiop phates (ZDDPS): characterisation and role in the lubricating oil; Tribology International; Vol. 34;
2001, p. 389-395
[52] P. Peng, S. Z. Hong, W.Z. Lu; The dagradation of Zinc Dialkydithiophosphate Aditives in Fully Formulated Engine Oil as Studied by P-31 NMR Specrtoscopy; Lubrication Engineering; March, 1994 p. 230-235
[53] J. M. Martin; Antiwear mechanisms of zinc dithiphosphate: a chemical hardness approach; Tribology LettersVol. 6; 1999; p. 1-8 [54] N.N. Greenwood, A. Earnshaw; Az Elemek Kémiája; Nemzeti Tankönykiadó; Budapest
[55] T. J. Risdon; Molybdenum Disulfide as a Lubricant – A review; 11th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 1998; p. 10.1-1 – 10.1-4
[56] R. D. Srivastava, A. K. Mehrotra, B. Sinda, R.K. Agnihotri; Graphite and Molybdenum Disulphide Lunricants Performance in Relation to Base Fluids; Esslingen 6.2-2 – 6.2-9 [57] J. Fatkin, A. Cron, M. Brendle; Transfer Films of MoS2, Graphite and MoS2-graphite Mixtures on Steel and Zirconia; Esslingen 13.1-1 – 13.1-13
[58] J. K. Lancaster; Materials and Composites for Dry-Film Lubrication – An Overview; Esslingen 5.3-1 – 5.3-18 [59] A.R. Lansdown; Molybdenum Disulphide Lubrication; Elsevier, 1999.
[60] Gmelin Handbook Mo Suppl. Vol B7; p. 88
[61] C. Grossiord, K. Varlot, J.-M. Martin, Th. Le Mogne, C. Esnouf and K. Ioune; MoS2 single sheet lubrication by moly enum dithiocarbamate; Tribology International Vol. 31, No. 12, 1998. p. 737-743
[62] C.Grossiord, J.M.Martin, Th. Le Mogne and Th. Palermo, UHV friction of tribofilms derived from metal dithiophosphates, 1998
[64] J. Graham, H. Spikes; The Behaviour of Molybdenum Dialkyldithiocarbamate Friction Modifier Additives; Lubrication at the Frontier/D. Dowson et al.; 1999; Elsevier Science B.V. p. 759-765
[65] J. Stipanovic, M. Shea; Effect of ligandum Exchange Reactions on the Activity of Organomolybdenum Friction Modifiers in Energy Conserving Engine Oils, 13th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2002;
[66] R. K. Jensen, S. Korcek, and M. D. Johnson; Understanding Ligand Exchange in a Molybdenum Dialylditiocarbamate/Zinc Dialkyldithiophosphate Additive System during Inhibited Oxidation in Various Base Oils; Symposium on Worldwide Perspectives on the Manufacture, Characterisation and Application of Lubticant Base Oils; IV. Presented Before the Division of Petroleum Chemistry, Inc. 218th National Meeting, American Chemical Society, 1999.
[67] F. Xie, J. Hu, F. Zeng, J. Yao; Anti-wear Synergism Between Organomolybdenum Compaunds and a ZnDDP; Esslingen; p. 311-314
[68] C. Grossiord, j. M. Martin, Th Le Monge, K. Inouse, J. Igarashi; Friction-reducing mechanisms of molybdenum dithiocarbamate/zinc dithiophosphate combination: New insights in MoS2 genesis, J. Vac. Sci. Technol. A 17 (3), May/Jun 1999; p. 884-890
[69] M. Muraki and H. Wada; Frictional Properties of organomolybdenum compounds in the presence of ZDTP’s under sliding conditions; Lubricants and Lubrication/D. Dowson et al.; 1995; Elsevier Science B.V.
[70] D. Wei, H. Song, R. Wang ; An Investigation of Effects of Some Motor Oil Additives on the Friction and Wear Behaviour of Oilsoluble Organomolybdenum Compounds ; Esslingen; 3.14-1 – 3.14-16
[71] C. Grossiord, J. M. Martin, Th Le Monge, Th. Palermo; In situ MoS2 formation and selective transfer from MoDTP films; Surface and Coatings Technology 108-109, 1998, p.
352-359
[72] A. J. Brown, I. A. W. Bell, J. M. McConnaiche, E. I. Stiefel; Molybdenum Dithiocarbamated for Enhanced Friction Control and Fuel Economy; Symposium on Recent Advances in the Chemistry of Lubricant Additives Presented before the Division of Petroleum Chemistry, Inc.; 218th National Meeting, American Chemical Society New Orleans, LA, August22-26, 1999; Conference Proceedings: p. 326-331
[73] US Pat. 5,906,968 [74] WO 99/66013
[75] Johnson, M. D. Jensen, R. K. and Korcek, S.; Base oil effect on friction reducing capabilities of molybdemum dialkyldithiocarbamate containing engine oils; SAE Tech. Papper 972860, 1997.
[76] US Pat. 4,035,309
[84] J. dditive; 14th International Colloquium
Tribology and Lubric n E [85] US Pat. 5,403,502 [86] C. Kajdas; Review of AW [87] H. A. Spikes; Additive-Ad
[88] F. G. Rounds; Additi nt 91-101
[89] R. G. Rowland, C. A. Migd in Chemistry of Lubricant
Additives, 218th Nati
[90] L. O. Farng, D. E. D a eering;
Stuttgart/Ostfildern, German
[91] S.S.V. Ramakumar, N. Ag Srivastava, A. K. Bhatnagar; Studies on Additive-Additive Interactions: Effects of Dispersant and Antioxidant
Additives on the Syn ti 1994. (7); p. 25-37
[92] P.A: Willermet, D.P. iley t-derived surface layers formed in a lubricated cam/tappet
contact II. Effects of adding overbased detergent and dispersant to a simple ZD P solution; Tribology International, Vol. 28, p. 163-175, 1995
[93] M. Shiomi, H. Tomizawa, T en 3.7-1 – 3.7-10
[94] Gallopoulos N. E:, C. K. Mu LE Transactions, 14, 1-7. Presented at the 25th
ASLE Annual Meeting in Chicago, 4-8 May. 1970
[95] P.A: Willermet, R. O. Carter, P. J. Schmitz, M. Everson, D. J. Scholl, W. H. ber; Formation, Structre and Properties of Lubricant-Derived Antiwear Films; Esslingen 1791 – 1808
[96] K.F.Miller, R.A.D.Wentworth, Inorg.Chem. 17, 2769 (1978).
M. Reinstaedtler, V. Sc ubrication Engineering
US Pat. 4,995,996
Zhang, S. Fu, D. Tao, R. Liu; Study on the Tribological Characteristics of an Noveél Organic Molybdenum Compound as Lubrication A atio ngineering; Stuttgart/Ostfildern, Germany; January 13-15, 2004; p. 287-291
and EP Working Mechanisms of Sulfur Compounds and Selected Metallo-organic Additives; Esslingen 4.6-1 – 4.6-19 ditive and Additive-Surface Interactions in Lubrication; Esslingen 4.2-1 – 4.2-12
ve I eractions and Their Effect on the Performance of a Zinc Dialkyl Dithiophosphate; ASLE Transactions, Vol. 21, 2, p.
al; Interactions of Ashless Antioxidants with Ashless Anti-Wear Agents in Lubricants; Symposium on Recent Advances onal meeting, American Chemical Society, New Orleans, LA, August 22-26, 1999
eckm n, W. A. Givens; Ashless Anti-Wear Additives for Future Engine Oils; 14th International Colloquium Tribology and Lubrication Engin y; January 13-15, 2004; p. 1547-1554
garwal, A. M. Rao, A.S. Sarpal, S. P.
ergis c Combination of Overbased Sulphonate and ZDDP; Lubrication Science 7-1, October Da , R. O. Carter, P. J. Schmitz, W. Zhu, J. C. Bell, D. Park; The composition of lubrican
T
. Kuribayashi, M. Tokashiki; Interaction between Zinc Dialkyl Dithiophosphate and Amine; Essling rphy, Interactions Between Zinc Dialkyl Diphosphorodithioate and Lubricating Oil Dispersants ; AS
We
[97] Inorg.Chem. 2001, 40, 3850-3860.
[98] Schrom, J.Plackmeyer, J.Sundermeyer, Eur.J.Inorg.Chem. 2001, 1937-1948.
[99] M. A. Freeman, F. A. Schultz, C. N. Reilley, Inorg. Chem. 21, 1982; p. 567-576 [100] J.G.Verkade, Acc.Chem.Res. 1993, 26, 483-489.
[101] J.Cruywagen, J.Bernard, B.Heyns, E.A.Rohwer J.Chem.Soc.Dalt.trans. 1994, p. 45-49 [103] S.Funahashi, Y.Kato, M.Nakayama, M.Tanaka, Inorg.Chem. 1981, 20, 1752-1756
[103] G. Kis, L. Bartha , J. Baladincz, G. Varga; Screening Methods for Selection of Additive Packages for Engine Oils; 40th International Petroleum Conference; September 17th-19th, 2001; Bratislava, Slovak Republic
[104] G. Kis, L. Bartha , J. Baladincz, G. Varga; Screening Methods for Selection of Additive Packages for Engine Oils; Petroleum and Coal, Vol. 43, 3-4, p. 167-172 [105] Kis G., Dr. Bartha L., Varga G.; Motorolajok laboratóriumi screening vizsgálatainak továbbfejlesztése; Műszaki Kémiai Napok, 2001 Veszprém
[106] G. KIS, L. BARTHA, J. AUER, G. VARGA; Upgrading the common screening method for engine oils (Panel coking), Tribo2000 Budapest
[107] G. Kis, L. Bartha, J. Baladincz, G. Varga; Screening Methods for Selection of Additive Packages for Engine Oils; 40th International Petroleum Conference; September 17th-19th, 200, Bratislava, Slovak Republic
[108] Kis, G., Bubálik, M., Bartha, L., Baladincz, J.; Modification of Shell 4 Ball Method for characterisation of friction properties of engine oil compositions, cikk [109] Hunyadi L, Mundruczó Gy, Vita L, Statisztika; Aula Kiadó, Bp, 2001
[110] Szatmáry Zoltán; Mérések kiértékelése; Egyetemi jegyzet; Budapesti Műszaki és Gazdaságtudományi EgyetemTermészettudományi Kar; Budapest, 2002 [111] B. Kröpfl, W. Peschek, E. Schneider, A. Schönlib; Alkalmazott statisztika; Műszaki Könyvkiadó; Budapest; 2000; ISBN 963 16 2657 I
[112] R. I. Taylor, E. Nagatomi, N. R. Horswill, D. M. James; A Screener Test for the Fuel Economy Potential of Engine Lubricants; 13th International Colloquium Tribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 13-15, 2002; p. 1419-1424
[113] US 5,716,912
[114] H. Mach; Highly Reactive Polyisobutene as a Composition Element for a New Generation of Lubricant Additives; Oil and Gas European Magazine; 2/1996; p. 38-40 [115] Nagy K.; Viszkozitásindex-Növelő Poliszukcinimidek Előállítása és Nyírásstabilitásának Vizsgálata; Diplomadolgozat; 2000
[116] WO 99/16851
[117] Veszprémi Egyetem;Ásványolaj- és Széntechnológiai Tanszék; Kutatási jelentés 2000
[118] B. Csukás, S. Balogh, S. Kováts, A. Aran ble Structur Models; Comp. and Chem. Eng. Suppl.
(1999) S569-S572
[119] agy, S. Balogh,G. Kis, L. Bartha, B. Csukás; Preparing Conditions and Properties of Olefin – Maleic Anhydride Copolymers; ; 40th International Petroleum Conference;
Sept ak Republic
[120] Direct Mapping of Conservational Processes; Hung. Jour. Of Ind. Chem., Vol.23. pp. 277-287 (1995)
[121] stributed Parameters by Direct Mapping, Hung. Jour. Of Ind. Chem., Vol.24. pp. 69-80 (1996)
[122] okkal alkotott komplexeinek 1H, 13C és 95Mo NMR spektroszkópiás vizsgálata; XXXVI.
K
[123] of Mononuclear Molybdenum Complexes of Triethanolamine. A Heteronuclear Dynamic Magnetic Resonance Study of
I hanisms; 15th International Meeting on NMR Spectroscopy, Durham, UK 8-12 July 2001.
[124] ria of mononuclear oxomolybdenum(VI) complexes of triethanolamine. A multinuclear dynamic magnetic resonance study of
s cta Part A 59 (2003) 1995-2007
[125] .Wentworth, Inorg.Chem. 17, 2769 (1978).
[126] Deng, H.P.Zhu, C.N.Chen, H.J.Fan, D.Z.Liao, E.Q.Gao, Inorg.Chem. 2001, 40, 3725-3733.
[127] Nuclear Magnetic Resonance, Elsevier, Amsterdam, 1991 p.67.
[128] .P.Shephan, A.G.Wedd, J.Magn.Res. 1985, 61, 516.
[129] e, M.J.Oconnors, A.G.Wedd, Coord.Chem.Reviews, 1969, 68, 169.
[130] Mol.Cat.A. 1996, 107, 379-383.
[131] A.Pacheco, K.Christensen, Inorg.Chim.Acta, 1997, 260, 225-228.
[132] 988, 27, 3535-3543.
[133] e, J.M.Gutierez-Zorilla, Polyhedron, 1992, 11, 2027-38.
[134] R and the Periodic Table, Academic Press, 1978, London.
[135] hem.Rev. 1992, 114, 107.
[136] er, L.Messerle, W.Shum, J.Am.Chem.Soc., 1976, 98, 2345-6.
[137] s-Jensen, I.Lucas, C.C.Romao, E.Herdtweck, J.Chem.Soc. Dalton.Trans. 2001, 1332-1337.
[138] ickening effects from interactions of engine oil additives; Interfaces; Sopron, 1999
[139] K lékok kölcsönhatásainak mechanikai stabilitása; Műszaki Kémiai Napok ’99;
[140] . K. Rai, M. M. and Bhatnar A. K ; Molybdenum dialkyldithiocarbamate synthesis and performance evaluation as multifunctional additives for lubricants, Tribol. Intern. 27, 1994 pp. 379-386).
[140] J. Igarashi ; The Mineral Oil Industry in Japan; 13th International Colloquium ribology and Lubrication Engineering; Stuttgart/Ostfildern, Germany; January 15-17, 2002; p.
13-17
[141] J.G.Verkade, Acc.Chem.Res. 1993, 26, 483-489.
[142] L. Bartha, G. Kis, J. Hancsók; Engine Oil Compositions Based on PIB-succinimide Combinations; 13th International Colloquium Tribology and Lubrication Engineering;
Stuttgart/Ostfildern, Germany; January 15-17, 2002; p. 1425-1433 G.E.Creco, R.R.Schrock,
H.Wittmann, V.Raab, A.
yi, Z. Kocsis, L.Bartha; Process Design by Controlled Simulation of the Executa al K. N
ember 17th-19th, 2000, Bratislava, Slov B. Csukás, S. Perez U.; Discrete Modelling by
B. Csukás, E. Pózna; Discrete Modelling of Conservational Processes with Di -trioxid aminoalkohol Kis Gábor, Bartha László, Szalontai Gábor; Molibdén
omplexkémiai Kollokvium; 2001. május 23-25.; Pécs László Bartha; Equilibria Gábor Szalontai, Gábor Kis,
ntermolecular Exchange Mec
Gábor Szalontai, Gábor Kis, László Bartha; Equilib tructure and exchange mechanisms.; Spectrochimia A K.F.Miller, R.A.D
Y.H.Chen, Q.T.Liu, Y.H.
P.S.Pregosin, Transition Metal R.C.Brownlee, M.J.OConnor, B M.Minelli, J.H.Enemark,R C.Brownle H.Teurel, A.Sierralta, J.
A.A.Holder, T.P.Dasgupta, W.McFarlane, N.Rees, J.H.Enemark, S.Bank, S.Liu, S.Shaik, X.Sun, J.Zubieta, P.Ellis, Inorg.Chem. 1 P.Roman, A.Luque, A.Aranzab
R.K.Harris, B.E.Mann, NM Q.Chen, J.Zubieta Coord.C M.Filowitz, W.G.Klemper A.Santos, F.E.Khün, K.Bruu
Dr. Bartha L., Kis G., dr. Auer J., Kocsis Z.; Properties of th os; Motorolaj ada is Gábor; Dr. Bartha László; Dr. Auer Ján
Sanh, R., D. K. Sureshbabu, A. V. Misura, A .
T