INTERCONNECT INTERCONNECT INTERCONNECT INTERCONNECT DESIGN GUIDEDESIGN GUIDEDESIGN GUIDEDESIGN GUIDEDESIGN GUIDE

(1)

Signal Integrity at any Distance

^™

Cable-to-Board Board-to-Board

Panel-to-Board

Panel-to-Panel

APRIL 2006 APRIL 2006

INTERCONNECT INTERCONNECT INTERCONNECT

INTERCONNECT DESIGN GUIDE DESIGN GUIDE DESIGN GUIDE DESIGN GUIDE DESIGN GUIDE

(2)

S S

Signal Integrity at any Distance ignal Integrity at any Distance ignal Integrity at any Distance ^™

Standard, Shielded & Rugged Stacking

• High Speed Single-Ended & Differential Pairs

• Shielded & Rugged Systems

• Edge Rate™ Contact Systems

• Mixed Technology Footprint High Density Arrays

• Differential Pair Arrays

• Elevated High Density Array

• Open Pin Field Arrays

• Open Pin Field Arrays Elevated Stacking

• Elevated Riser Card Systems

• Application Specific Elevated Q Series

• Application Specific Elevated Q Series^®

• High Speed Card Interfaces

• Right Angle & Application Specific Edge Mount

High Speed Interfaces

In-house design, analysis and manufacturing of high speed connectors, circuits and subsystems In-house design, analysis and manufacturing of high speed connectors, circuits and subsystems In-house design, analysis and manufacturing of high speed connectors, circuits and subsystems for Board-to-Board, Cable-to-Board, Panel-to-Board and Panel-to-Panel applications.

for Board-to-Board, Cable-to-Board, Panel-to-Board and Panel-to-Panel applications.

Board-to-Board . . . .4-9

Cable-to-Board . . . 10-13

Panel-to-Board . . . 14

Panel-to-Panel . . . 15

I/O Cable Plugs I/O Cable Plugs

• AccliMate™ Sealed Circular Cable Plugs

• High Speed Data Rate™ I/O Cable Plugs

• High Speed I/O Cable Plugs

• High Speed I/O Cable Plugs I/O Receptacles

I/O Receptacles

• AccliMate™ Sealed Circular Receptacles

• High Speed Data Rate™ I/O Receptacles

• High Speed I/O Receptacles

• High Speed I/O Receptacles Data Rate™ Cable Assemblies Data Rate™ Cable Assemblies Data Rate™ Cable Assemblies

• Twinax Data Rate™ Cables

• Micro Coax Data Rate™ Cables

• Custom Data Rate™ Assemblies

• Custom Data Rate™ Assemblies RF Connectors & Cable Assemblies RF Connectors & Cable Assemblies RF Connectors & Cable Assemblies

• RF Cable Assemblies & Components

• Panel Mount & Board Mount RF Connectors

• Custom RF Cable Assemblies

• Custom RF Cable Assemblies High Speed Flex

High Speed Flex

• Standard High Speed Flex

• High Speed Edge Card & Data Links

• High Density Jumper

(3)

Signal Integrity Support

Integrated and accessible Signal Integrity services, support and reference for selection, Integrated and accessible Signal Integrity services, support and reference for selection, Integrated and accessible Signal Integrity services, support and reference for selection, Integrated and accessible Signal Integrity services, support and reference for selection, Integrated and accessible Signal Integrity services, support and reference for selection, development, simulation and testing of high speed systems for any application.

development, simulation and testing of high speed systems for any application.

Signal Integrity Services . . . .16-17

Signal Integrity Center Signal Integrity Center

• User friendly website

• High speed connector simulations, models,

• High speed connector simulations, models, reports, drawings and searches

reports, drawings and searches reports, drawings and searches

• SPICE, IBIS models

• High speed characterization reports

• Time and frequency domain test data

• Models of connector components soldered to

• Models of connector components soldered to boards with Samtec recommended PCB footprints boards with Samtec recommended PCB footprints boards with Samtec recommended PCB footprints

• Bandwidth Performance Selector and Bandwidth Performance Selector and Bandwidth Performance Selector and Interactive Cable Builder

Interactive Cable Builder Interactive Cable Builder

• Application notes: reference designs that verify Application notes: reference designs that verify Application notes: reference designs that verify Application notes: reference designs that verify performance to industry standards

performance to industry standards

Final Inch ^® . . . 18-19

Signal Integrity Group Signal Integrity Group

• Personal SI support for questions that cannot

• Personal SI support for questions that cannot be answered via the Signal Integrity Center be answered via the Signal Integrity Center be answered via the Signal Integrity Center

• EE customer interface via in-house staffEE customer interface via in-house staffEE customer interface via in-house staff

• Design, modeling and testing of subsystems Design, modeling and testing of subsystems Design, modeling and testing of subsystems Design, modeling and testing of subsystems including Samtec mated connector components, including Samtec mated connector components, including Samtec mated connector components, including Samtec mated connector components, including Samtec mated connector components, traces through PCBs, cabling, other devices traces through PCBs, cabling, other devices traces through PCBs, cabling, other devices traces through PCBs, cabling, other devices and multiple connectors

and multiple connectors and multiple connectors

• Application Specific Services for de

• Application Specific Services for design, modeling and testing of your full system or modeling and testing of your full system or modeling and testing of your full system or modeling and testing of your full system or subsystem including the PCB and all passive subsystem including the PCB and all passive subsystem including the PCB and all passive subsystem including the PCB and all passive subsystem including the PCB and all passive and active components

and active components and active components

• Samtec involvement available Samtec involvement available Samtec involvement available at various levelsarious levelsarious levels

• Specific services tailored to Specific services tailored to Specific services tailored to your needs and products your needs and products your needs and products

• Extensive modeling, simulation Extensive modeling, simulation Extensive modeling, simulation and testing capabilities

and testing capabilities

PCB Design Tools

• Reference designs that save design, development

• Reference designs that save design, development and validation time and resources

• Models of connector components with Samtec recommended Models of connector components with Samtec recommended Final Inch^®^®^® PCB trace routing to the connector PCB trace routing to the connector

• Downloadable art files and HSPICE simulations

• Test and evaluation kits

• Empirical signal integrity data

• “On-Request” test data

PANEL-TO-PANEL

PANEL-TO-BOARD CABLE-TO-BOARD

BOARD-TO-BOARD SUDDEN SERVICE^®

A full line of interconnect solutions for Signal Integrity, Rugged A full line of interconnect solutions for Signal Integrity, Rugged and Micro applications, with the unique ability to weave products and Micro applications, with the unique ability to weave products together for mix-and-match solutions for custom applications.

together for mix-and-match solutions for custom applications.

(4)

0,635mm (.025"

0,635mm (.025") Pitch ) Pitch

• 505050ΩΩSingle-Ended standard, Application Specific 100Single-Ended standard, Application Specific 100Single-Ended standard, Application Specific 100ΩDifferential PairDifferential PairDifferential Pair

•

• Up to 200 signal pins standard, Application Specific to 250 pinsUp to 200 signal pins standard, Application Specific to 250 pinsUp to 200 signal pins standard, Application Specific to 250 pinsUp to 200 signal pins standard, Application Specific to 250 pinsUp to 200 signal pins standard, Application Specific to 250 pins

• 5mm and 8mm mated heights standard, Application Specific to 16mm5mm and 8mm mated heights standard, Application Specific to 16mm5mm and 8mm mated heights standard, Application Specific to 16mm5mm and 8mm mated heights standard, Application Specific to 16mm5mm and 8mm mated heights standard, Application Specific to 16mm5mm and 8mm mated heights standard, Application Specific to 16mm

• Standard surface mount right angle designs; edge mount availableStandard surface mount right angle designs; edge mount availableStandard surface mount right angle designs; edge mount availableStandard surface mount right angle designs; edge mount availableStandard surface mount right angle designs; edge mount available

•

• Shielded and rugged designs available Shielded and rugged designs available Shielded and rugged designs available Shielded and rugged designs available Shielded and rugged designs available (See QMSS, QFSS and QMS/QFS) (See QMSS, QFSS and QMS/QFS) (See QMSS, QFSS and QMS/QFS) (See QMSS, QFSS and QMS/QFS) (See QMSS, QFSS and QMS/QFS)

• For complete specifications see:

www.samtec.com?QTS www.samtec.com?QTS www.samtec.com?QTS www.samtec.com?QSS www.samtec.com?QSS www.samtec.com?QSS

AGILENT LOGIC ANALYZER MATE:

ASP-65067-01

0,80mm QTE/QSE Rated @ -3dB Insertion Loss 5mm Stack Height

Single-Ended Signaling 9 GHz / 18 Gbps Differential Pair Signaling 8 GHz / 16 Gbps 0,80mm QTE/QSE-DP Rated @ -3dB Insertion Loss 5mm Stack Height

Differential Pair Signaling 8.5 GHz / 17 Gbps

0,50mm QTH/QSH Rated @ -3dB Insertion Loss 5mm Stack Height

Single-Ended Signaling 9 GHz / 18 Gbps Differential Pair Signaling 8 GHz / 16 Gbps 0,50mm QTH/QSH-DP Rated @ -3dB Insertion Loss 5mm Stack Height

Differential Pair Signaling 9.5 GHz / 19 Gbps

Data Rate™ Cable &

High Speed Flex Mates HQCD Single-Ended 50Single-Ended 50Ω Micro Coax HQDP Differential Pair 100Ω Twinax HFHM/HFHM2 SE 50Ω or DP 100Ω Flex 0,635mm QTS/QSS Rated @ -3dB Insertion Loss 5mm Stack Height

Single-Ended Signaling 9 GHz / 18 Gbps Differential Pair Signaling 8.5 GHz / 17 Gbps

Data Rate™ Cable &

High Speed Flex Mates EQCD Single-Ended 50Single-Ended 50Ω Micro Coax EQSD Single-Ended 75Single-Ended 75Ω Micro Coax EQDP Differential Pair 100Ω Twinax HFEM/HFEM2 SE 50Ω or DP 100Ω Flex ZFHF Differential Pair 100Ω Flex

Data Rate™ Cable Mates SQCD Single-Ended 50Ω Micro Coax

www.samtec.com/FI www.samtec.com/FI www.samtec.com/FI Kits available. See pages 18-19.

Kits available. See pages 18-19.

Board-to-Board Board-to-Board Board-to-Board

®

PCI ExprXAUI PCI Express PCI Express PCI Expr

SATA SATA SA Download at www.samtec.com/appnote

www.samtec.com/FI www.samtec.com/FI www.samtec.com/FI Kits available. See pages 18-19.

®

0,8mm (.0315") Pitch ) Pitch

• 50ΩSingle-Ended and 100Ω Differential Pair

• Up to 160 signal pins standard, Application Specific to 200 pins

• Up to 56 signal pairs standard, Application Specific to 70 pairs

• 5mm and 8mm mated heights standard, Application Specific to 30mm

• Edge mount available

• Guide post options

• Final Inch^®^®^® PCB design kits and PCB design kits and PCB design kits and Application Notes available

• Wide variety of DataRate™ cable cable cable and high speed flex cable mates and high speed flex cable mates and high speed flex cable mates and high speed flex cable mates

www.samtec.com?QTE www.samtec.com?QTE www.samtec.com?QSE www.samtec.com?QSE www.samtec.com?QTE-DP www.samtec.com?QTE-DP www.samtec.com?QSE-DP www.samtec.com?QSE-DP

0,50mm (.0197") Pitch 0,50mm (.0197") Pitch 0,50mm (.0197") Pitch

• 50ΩSingle-Ended and 100Single-Ended and 100ΩΩ Differential Pair

Differential Pair

• U

• Up to 240 signal pins standard, p to 240 signal pins standard, Application Specific to 300 pins Application Specific to 300 pins Application Specific to 300 pins

• Up to 80 signal pairs standard, Up to 80 signal pairs standard, Application Specific to 100 pairs Application Specific to 100 pairs

• 5mm mated height standard, Application 5mm mated height standard, Application 5mm mated height standard, Application Specific to 30mm

Specific to 30mm

• Application Specific edge mount and Application Specific edge mount and guide post options

guide post options

•

• Final InchFinal Inch^®^®^® PCB design PCB design kits available

• Wide variety of Data RateWide variety of Data Rate™ cable and cable and high speed flex cable mates

high speed flex cable mates

www.samtec.com?QTH www.samtec.com?QTH www.samtec.com?QSH www.samtec.com?QSH

Standard Stacking

(5)

Shielded & Rugged Shielded & Rugged

Shielded & Rugged Systems Systems

• Increased insertion depth for rugged applications

• Optional EMI Shielding attached to board via

• Optional EMI Shielding attached to board via selected signal pins

selected signal pins

• Dual stage hot pluggable: shield and ground

• Dual stage hot pluggable: shield and ground planes first, then signal pins

planes first, then signal pins

• Shielded or unshielded

• .025" (0,635mm) pitch

• 10mm and 11mm mated heights

• Up to 208 signal pins standard

• Up to 64 signal pairs standard

• Integrated guide posts

• RF, power and guide post

• RF, power and guide post options available

options available

• Application Specific Differential

• Application Specific Differential Pair designs available

Pair designs available

www.samtec.com?QFS www.samtec.com?QFS www.samtec.com?QMS www.samtec.com?QMS www.samtec.com?QMS www.samtec.com?QMSS www.samtec.com?QMSS www.samtec.com?QMSS www.samtec.com?QFSS www.samtec.com?QFSS www.samtec.com?QMSS-EM www.samtec.com?QMSS-EM

Mixed Technology Footprint Mixed Technology Footprint

• Discrete ground plane every .500" (12,70mm) soldered

• Discrete ground plane every .500" (12,70mm) soldered to plated through-holes for added PCB retention to plated through-holes for added PCB retention

• 76 signal lines per linear inch (266 total)

• .025" (0,635mm) pitch

• 5mm and 8mm mated heights standard, Application Specific to 22mm

www.samtec.com?MIT www.samtec.com?MIS Power Pins,

Power Pins, Optional Shields Optional Shields Optional Shields

& RF Connectors

& RF Connectors available available Optional Shields

Shielded & Rugged Stacking

Edge Rate Edge Rate Edge Rate

^™^™

Contact System Contact System Contact System

• Robust when zippered during mating

• Robust when zippered during mating and unmating

and unmating

• 0,8mm pitch

• 7mm and 10mm stacking height

• ERM8 and ERF8 are currently in design.

Contact Samtec for more information.

• Designed for Signal Integrity

• Superior Impedance Control

• Reduced broadside coupling

• Reduced broadside coupling (cross talk)

(cross talk) (cross talk)

• Rugged contact system

0,635mm Pitch MIS/MIT Rated @ -3dB Insertion Loss 5mm Stack Height

Single-Ended Signaling 8.5 GHz / 17 Gbps Differential Pair Signaling 8.5 GHz / 17 Gbps

®

Data Rate™ Cable Mates 6QDPS Shielded DP 100Ω Twinax 6QDP Unshielded DP 100Ω Twinax

Data Rate™ Cable Mates MICD Single-Ended 50Ω Micro Coax

XAUI PCI Expr PCI Express PCI Express PCI Expr

SATA SATA SA Download at www.samtec.com/appnote

0,635mm QFS/QMS-DP Rated @ -3dB Insertion Loss*

11mm Stack Height

Differential Pair Signaling 7 GHz / 14 Gbps 0,635mm QFS/QMS Rated @ -3dB Insertion Loss*

Single-Ended Signaling 8 GHz / 16 Gbps Differential Pair Signaling 7.5 GHz / 15 Gbps

TM TM

Optional Retention Optional Retention Optional Retention Optional Retention Optional Retention Pins increase Pins increase Pins increase Pins increase Pins increase unmating force unmating force unmating force unmating force

TM

(6)

Rapid I/O Rapid I/O

SATA SATA SA Download at www.samtec.com/appnote.com/appnote

TM

Perimeter Perimeter Grounds Grounds Grounds Grounds Grounds Differential Differential Pairs

Elevated High Elevated High Elevated High Density Arrays Density Arrays

• High density board-to-board

• 1,2mm x 2mm grid

• Open pin field for

• Open pin field for Single-Ended or Single-Ended or Single-Ended or

Differential Pair configurations Differential Pair configurations Differential Pair configurations Differential Pair configurations

• Elevated stack heights of 20mm, 25mm,

• Elevated stack heights of 20mm, 25mm, 30mm and 35mm

30mm and 35mm

• 299 and 143 pins

• Variety of heights and pin counts available

• HD Mezz™ is currently in design;

Contact Samtec for more information Contact Samtec for more information Contact Samtec for more information Contact Samtec for more information

*HD Mezz™ is a trademark of Molex, Inc.

www.samtec.com/FI www.samtec.com/FI www.samtec.com/FI www.samtec.com/FI www.samtec.com/FI www.samtec.com/FI Kits available. See pages 18-19.

Differential Pair Arrays

• Maximizes bandwith per square inch of board area

• Staggered pin layout reduces grounds required and makes board routing easier

• Performance of up to a terabit per connector (up to 4 GHz per pair)

• Lower insertion/extraction forces

• Perimeter grounds

• Solder crimp terminationmp termination

• Up to 168 usable pairs

• 10mm and 17mm mated height

• 10mm and 17mm mated heightss

www.samtec.com?D www.samtec.com?DPAM www.samtec.com?DPAF

Right Angle Right Angle

Differential Pair Arrays Differential Pair Arrays Differential Pair Arrays

• High density right angle applicationsHigh density right angle applicationsHigh density right angle applications

• Integral Flex Circuit reduces skewIntegral Flex Circuit reduces skew

• Solder Ball Interface

• Screw Mount for Rugged Applications

• Staggered l

• Staggered layout reduces grounds requireayout reduces grounds required

• Up to 63 usable pa

• Up to 63 usable pairs (assumes first and last irs (assumes first and last irs (assumes first and last pair in each row are grounded)

pair in each row are grounded) pair in each row are grounded)

www.samtec.com?

www.samtec.com?RDPAFRDPAF

Staggered pitch DPAM/DPAF Rated @ -3dB Insertion Loss*

Single-Ended Signaling 5.5 GHz / 11 Gbps Differential Pair Signaling 4 GHz / 8 Gbps

*Data based on simulations using Final Inch^® design.

MEZZ

Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals Surface Mount Solder Ball Terminals

TM

Board-to-Board Board-to-Board Board-to-Board

High Density Arrays

(7)

Open Pin Field Arrays

• (1,27mm x 1,27mm) .050" x .050" array

• Up to 500 pins

• 7mm, 8,5mm and 10mm mated heights

• Choice of Tin-Lead & Lead Free solder charge terminations

• Lower insertion/extraction forces

• Final Inch^®^®^® kits available kits available

www.samtec.com?

www.samtec.com?SEAM www.samtec.com?

www.samtec.com?SEAF

Rapid I/O XMC Connectors Rapid I/O XMC Connectors Rapid I/O XMC Connectors Rapid I/O XMC Connectors

• 6 x 19 Array 10mm height6 x 19 Array 10mm height6 x 19 Array 10mm height

•

• No solder ballsNo solder ballsNo solder ballsNo solder balls

• Socket: ASP 105884-01Socket: ASP 105884-01

• Terminal: ASP-105885-01Terminal: ASP-105885-01Terminal: ASP-105885-01

• Contact asp@samtec.com for more informationContact asp@samtec.com for more informationContact asp@samtec.com for more informationContact asp@samtec.com for more information

��

Traditional Grid Arrangement Arrangement Rapid I/O

Rapid I/O Download at www.samtec.com/appnote

Rapid I/O Rapid I/O Download at www.samtec.com/appnote

1,27mm pitch SEAM/SEAF Rated @ -3dB Insertion Loss*

Single-Ended Signaling 4 GHz / 8 Gbps Differential Pair Signaling 9 GHz / 18 Gbps

1,27mm pitch YFS/YFT Rated @ -3dB Insertion Loss*

®

www.samtec.com/FI Kits available. See pages 18-19.

One Piece Interfaces One Piece Interfaces One Piece Interfaces One Piece Interfaces One Piece Interfaces One Piece Interfaces

• 3mm stack height

• .050" (1,27mm) pitch grid

• No solder joint reliability issues

• No bent pins

• No bent pins or or rework costs

• Low profile and high density for high

• Low profile and high density for high speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility speed signal/ground flexibility

• Custom pin counts available

www.samtec.com?

www.samtec.com?GFZGFZ

Open Pin Field Arrays Open Pin Field Arrays Open Pin Field Arrays Open Pin Field Arrays

• (1,27mm x 1,27mm) .050" x .050" array

• Up to 500 pins

• Tiger Eye™ Contact for highest reliability

• 5mm, 7mm, 9mm, 12mm, 19mm and 25mm

• 5mm, 7mm, 9mm, 12mm, 19mm and 25mm mated heights

mated heights mated heights

www.samtec.com?

www.samtec.com?YFSYFS www.samtec.com?

www.samtec.com?

www.samtec.com?YFTYFT www.samtec.com?

www.samtec.com?

www.samtec.com?YFWYFW

CONTACT TM

(8)

Elevated Stacking

Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board Board-to-Board

Elevated Riser Card System

• High speed board with embedded ground plane mates with micro edge card connectors

• Custom height flexibility; less expensive custom heights

• Quick-turn, cost-effective customs in low and prototype quantities

• Board available from Samtec (HSC8 Series), use

• Board available from Samtec (HSC8 Series), use your own, or use Samtec’s layout on your boardSamtec’s layout on your board

• 19mm, 25mm or 30mm standard mated heights

• Final Inch^®^®^® PCB design kits and Application PCB design kits and Application Notes available

• Single-Ended or Differential Pair signal routing

• Up to 60 Single-Ended signals

• Up to 38 Differential Pairs

www.samtec.com?RU8

0,80mm pitch RU8 Rated @ -3dB Insertion Loss 0,80mm pitch RU8 Rated @ -3dB Insertion Loss 25mm Stack Height

Single-Ended Signaling 7.5 GHz / 15 Gbps Differential Pair Signaling 7.5 GHz / 15 Gbps Single-Ended Signaling 7.5 GHz / 15 Gbps Differential Pair Signaling 7.5 GHz / 15 Gbps

Application Specific Application Specific Elevated Q Series Elevated Q Series

^®

• Contact Samtec for availability

• 5mm through 30mm

• 5mm through 30mm mated heightsmated heights

• 0,50mm, 0,635mm and 0,80mm pitch

• Single-Ended and Differential Pair

0,50mm QTH/QSH0,635mm

QTS/QSS 0,635mm MIT/MIS 0,80mm

QTE/QSE Stack Height

5mm 5mm 5mm 5mm 8mm 8mm 8mm 8mm 11mm 11mm 11mm 11mm

14mm 14mm

16mm 16mm 16mm 16mm 19mm 18.75mm 19mm

22mm 22mm 22mm

25mm 25mm

30mm 30mm

• Designed for Signal Integrity

• Superior Impedance Control

• Reduced broadside coupling

• Reduced broadside coupling (cross talk)

• Rugged contact system

0,80mm pitch RU8 Rated @ -3dB Insertion Loss 25mm Stack Height

Single-Ended Signaling 7.5 GHz / 15 Gbps Differential Pair Signaling 7.5 GHz / 15 Gbps

® ®

SATA SATA SA Download at www.samtec.com/appnote www.samtec.com/FI

www.samtec.com/FI Kits available. See pages 18-19.

(9)

Horizontal & Perpendicular

High Speed Card Interfaces

• Pass-through Card Interface

• 1mm Pitch Card Interfaces

• 0,8mm Pitch Card Interfaces

• 0,635mm Pitch Card Interfaces

• Application Specific interface

• Application Specific interface cards available

cards available

www.samtec.com?SAL1 www.samtec.com?SAL1

www.samtec.com?MEC1 or PCIE www.samtec.com?MEC1 or PCIE www.samtec.com?MEC8 or HSEC8 www.samtec.com?MEC8 or HSEC8 www.samtec.com?MEC6

www.samtec.com?MEC6

Right Angle

• .025" (0,635mm) pitch

• PCB mounting holes

• Guide posts

• Up to 200 I/Os

• Application Specific Differential Pairs

• Locking screw options

Application Specific Edge Mount

• Contact Samtec for availability

• 0,50mm (.0315"), .025" (0,635mm) and 0,80mm (.0315") pitch

• Accepts (1,60mm) .062" PCB

• Guide posts available

• Up to 250 I/Os

�� �� ��

��

APPLICATIONS

PERPENDICULAR APPLICATIONS

HORIZONTAL HORIZONTAL HORIZONT

APPLICATIONS APPLICATIONS

1,00mm pitch SAL1 Rated @ -3dB Insertion Loss 1,00mm pitch SAL1 Rated @ -3dB Insertion Loss Single-Ended Signaling 8.5 GHz / 17 Gbps Single-Ended Signaling 8.5 GHz / 17 Gbps Differential Pair Signaling 9 GHz / 18 Gbps Differential Pair Signaling 9 GHz / 18 Gbps

*Data is for top-entry applications.

Horizontal & Perpendicular

(10)

Data Rate ^™ Cable Assemblies

Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board

Twinax Data Rate Twinax Data Rate Twinax Data Rate™

Twinax Data Rate™

Twinax Data Rate Cable Cable

• 30 AWG ribbon twinax cable

• 100

• 100ΩΩDifferential Pair signal routingDifferential Pair signal routingDifferential Pair signal routing

• Choice of terminations:

- Edge card - Edge card

- High speed connectors

- High speed connectors on 0,5mm, on 0,5mm, 0,635mm

0,635mm and 0,8mm pitchand 0,8mm pitch - Shielded High Speed Connectors - Shielded High Speed Connectors - Shielded High Speed Connectors

on 0,635mm pitch0,635mm pitch

• Low skew (pair-to-pair < 10 ps/ft;

within a pair < 5ps/ft ) within a pair < 5ps/ft )

• Superior EMI Performance EMI Performance (FCC Class A)

(FCC Class A)

• Contact hdr@samtec.com

for custom Signal Integrity specifications for custom Signal Integrity specifications for custom Signal Integrity specifications for custom Signal Integrity specifications for custom Signal Integrity specifications

www.samtec.com?EQDP www.samtec.com?EQDP www.samtec.com?HQDP www.samtec.com?HQDP www.samtec.com?EEDP www.samtec.com?EEDP www.samtec.com?6QDPS www.samtec.com?6QDPS

Micro Coax Data Rate Micro Coax Data Rate™

Micro Coax Data Rate™

Micro Coax Data Rate Cable

• 38 AWG micro ribbon coax cable

• 50Ω & 75Ω signal routing

• 0,5mm, 0,635mm and 0,8mm pitch

• Vertical or edge mount termination to cable

• Ideal for longer cable assemblies (6" to 40")

www.samtec.com?SQCD www.samtec.com?MICD www.samtec.com?HQCD www.samtec.com?EQCD www.samtec.com?HBCD www.samtec.com?EQSD

Twinax Data Rate™ Cable Assemblies Rated @ -3dB Insertion Loss

SERIES EQDP HQDP EEDP 6QDPS

PITCH 0,8 mm 0,5 mm 0,8 mm 0,635 mm

MATES QTE-DP/QSE-DP QTH-DP/QSH-DP HSEC8 QMSS-DP/QFSS-DP

12" (304,8mm) 4.74 GHz / 9.48 Gbps 2.12 GHz / 4.24 Gbps N/A 1.86 GHz / 3.72 Gbps 19.68" (0,5m) 4.46 GHz / 8.92 Gbps 1.64 GHz / 3.28 Gbps 2.85 GHz / 5.70 Gbps 1.58 GHz / 3.16 Gbps 39.37" (1m) 1.59 GHz / 3.18 Gbps 1.37 GHz / 2.74 Gbps 1.15 GHz / 2.30 Gbps 1.25 GHz / 2.50 Gbps

Micro Coax Data Rate™ Cable Assemblies Rated @ -3dB Insertion Loss

SERIES EQCD HQCD MICD HBCD

PITCH 0,8 mm 0,5 mm 0,635 mm 0,5 mm

MATES QTE/QSE QTH/QSH MIS/MIT BTH/BSH

12" (304,8mm) 1.42 GHz / 2.82 Gbps 1.16 GHz / 2.32 Gbps 801 MHz / 1.60 Gbps 2.01 GHz / 4.02 Gbps 19.68" (0,5m) 900 MHz / 1.80 Gbps 740 MHz / 1.48 Gbps 648 MHz / 1.29 Gbps 1.60 GHz / 3.20 Gbps 39.37" (1m) 480 MHz / 0.96 Gbps 390 MHz / 0.78 Gbps 400 MHz / 0.80 Gbps 586 MHz / 1.17 Gbps

(11)

Custom Data Rate Custom Data Rate Custom Data Rate Custom Data Rate Custom Data Rate™

Custom Data Rate™

Custom Data Rate Cable Assemblies Cable Assemblies Cable Assemblies

• Standard Data Rate™

assemblies on a variety assemblies on a variety of pitches

of pitches

• I/O terminations

• Custom connectors

• Other AWG available

• Hot plugging

• Various sizes and lengths

• Screw Downs and other

• Screw Downs and other rugged options

rugged options rugged options

• Customized signal routing

• Variety of terminations

• Breakout to multiple boards

• Q Series

• Q Series^®^®^® terminations terminations terminations

• Signal & Power cable

• Signal & Power cable combinations combinations

• Mix & Match twinax & coax

• UV cured epoxy for cable

• UV cured epoxy for cable termination region protection termination region protection

Board-to-Board Micro Coax Data Rate™

Coax Data Rate™

Coax Data Rate Cable

• 38 AWG micro ribbon coax cable

• 50Ω signal routing

• Header or socket termination

• Vertical or edge mount

• .050" (1,27mm) micro, 2mm (.079") and

• .050" (1,27mm) micro, 2mm (.079") and .100" (2,54mm) pitch

• .050" (1,27mm) pitch with high reliability

• .050" (1,27mm) pitch with high reliability Tiger Eye™ Contact

• .100" (2,54mm) pitch is JTAG (IEEE 1149.1) compatible

www.samtec.com?FHSC www.samtec.com?THSC www.samtec.com?HHSC

Micro Coax Data Rate™ Cable Assemblies Rated @ -3dB Insertion Loss

SERIES FHSC THSC HHSC

PITCH 1,27 mm 2 mm 2,54 mm

MATES SFM/TFM SQW/TMMH SSW/TSW

10" (254mm) 175 MHz / 0.35 Gbps 175 MHz / 0.35 Gbps 400 MHz / 0.8 Gbps

��

Visit www.samtec.com /cable_builder Visit www.samtec.com /cable_builder Visit www.samtec.com /cable_builder for our Interactive Cable Builder program!

for our Interactive Cable Builder program!

(12)

Custom RF Cable Assemblies Custom RF Cable Assemblies Custom RF Cable Assemblies

• Military & Automotive

• Military & Automotive applications

applications

• Pigtails

• I/O assemblies

• Custom connectors

• Higher precision

• Higher precision termination for lower loss termination for lower loss

• Other cable lengths and styles

• Variety of terminations

• Custom grounding, circuitry

• Shielding

RF Panel & Board Mount RF Panel & Board Mount RF Panel & Board Mount Connectors

• 50ΩΩ MMCX, MCX, SMA, GRF1, MMCX, MCX, SMA, GRF1, SMB and TNC connectors SMB and TNC connectors

• 75

• 75ΩΩ MCX, BNC and SMB connectors

• Ideal for limited space and weight applications

• Straight and right angle orientations

• Jacks and plugs

• Through-hole, Edge Mount, Surface Mount and Panel Mount

• For complete RF connector

• For complete RF connector specifications, please visit specifications, please visit www.samtec.com/RF www.samtec.com/RF

RF Cable Assemblies RF Cable Assemblies RF Cable Assemblies

& Components

• Discrete assemblies with MHF,

• Discrete assemblies with MHF, MMCX, MCX, SMA or SMA MMCX, MCX, SMA or SMA MMCX, MCX, SMA or SMA MMCX, MCX, SMA or SMA Bulkhead end options Bulkhead end options Bulkhead end options

• Ganged assembly with in-line

• Ganged assembly with in-line RF Jacks & Plugs

RF Jacks & Plugs

• Sealed Circular Assembly with

• Sealed Circular Assembly with RF Jacks & Plugs

RF Jacks & Plugs

• Single or double ended options

• Straight or right angle orientations

• Jacks, plugs and reverse polarity

• Wide variety of RG cables

• Variety of terminations available

• 50

• 50ΩΩ SMA, MCX, MMCX, NTPE, TNC, BNC SMA, MCX, MMCX, NTPE, TNC, BNC SMA, MCX, MMCX, NTPE, TNC, BNC and SMB cable components

and SMB cable components

• 75

• 75ΩΩ MCX, BNC and SMB cable components MCX, BNC and SMB cable components MCX, BNC and SMB cable components

• For compl

• For complete RF cable assembly and componenly and component t specifications see: www.samtec.co

specifications see: www.samtec.com/RFm/RF

RF Cables & Connectors

Cable-to-Board

(13)

High Speed Edge Card High Speed Edge Card High Speed Edge Card

• Double-sided card interface for mating with mini edge card

• Double-sided card interface for mating with mini edge card connectors on 0,8mm pitch

connectors on 0,8mm pitch

• Choice of vertical, horizontal and edge mount mating connectors

• Easy customization of cable

• Easy customization of cable lengths, pin counts, polarization, etc.lengths, pin counts, polarization, etc.

• For complete specifications ete specifications see: www.samtec.comsee: www.samtec.com??HSF8HSF8

Standard High Speed Flex Standard High Speed Flex

• Terminate with Single-Ended or Differential Pair

• Terminate with Single-Ended or Differential Pair high speed connectors

• 0,5mm and 0,8mm pitch systems

• High Speed shielded flex circuits

• Easy customization of cable lengths, pin counts, guide posts, connector heights, etc.

www.samtec.com?HFEM or HFEM2

www.samtec.com?HFHM or HFHM2 Differential Pair High Speed Flex Assemblies Rated @ -3dB Insertion Loss

SERIES HFEM HFEM2 HFHM HFHM2 ZFHF

PITCH 0,8 mm 0,8 mm 0,5 mm 0,5 mm 0,8 mm

MATES QTE-DP/QSE-DP QTE-DP/QSE-DP QTH-DP/QSH-DP QTH-DP/QSH-DP QSE-DP/ZF5

5" (127mm)

5" (127mm) 3.75 GHz / 7.5 Gbps3.75 GHz / 7.5 Gbps 2.62 GHz / 5.24 Gbps2.62 GHz / 5.24 Gbps 2.40 GHz / 4.80 Gbps2.40 GHz / 4.80 Gbps 2.36 GHz / 4.72 Gbps2.36 GHz / 4.72 Gbps 3.16 GHz / 6.32 Gbps3.16 GHz / 6.32 Gbps 10" (254mm)

10" (254mm) 1.75 GHz / 3.5 Gbps1.75 GHz / 3.5 Gbps 1.36 GHz / 2.72 Gbps1.36 GHz / 2.72 Gbps 1.80 GHz / 3.60 Gbps1.80 GHz / 3.60 Gbps 1.64 GHz / 3.28 Gbps1.64 GHz / 3.28 Gbps 1.65 GHz / 3.30 Gbps1.65 GHz / 3.30 Gbps Single-Ended High Speed Flex Assemblies Rated @ -3dB Insertion Loss

SERIES HFEM HFEM2 HFHM2 HSF8

PITCH 0,8 mm 0,8mm 0,5 mm 0,8 mm

MATES QTE/QSE QTE/QSE QTH/QSH HSEC8

5" (127mm) 1.85 GHz / 3.70 Gbps 2.13 GHz / 4.26 Gbps 1.91 GHz / 3.82 Gbps 6 GHz / 12 Gbps 10" (254mm) 1.15 GHz / 2.30 Gbps 1.23 GHz / 2.46 Gbps 1.05 GHz / 2.10 Gbps 4.5 GHz / 9 Gbps

Design/Build Design/Build Design/Build Capabilities Capabilities

• Double-Sided and Multi-Layer

• High speed, controlled

• High speed, controlled impedance designs impedance designs

• Design and manufacture

• Design and manufacture capabilities

capabilities

• Connector and component

• Connector and component placement

• Contact flexcircuits@samtec.com

High Density Jumper High Density Jumper High Density Jumper

• Mates with SEARAY™

open pin field arrays open pin field arrays open pin field arrays

• Standard and custom

• Standard and custom jumper lengths and jumper lengths and jumper lengths and jumper lengths and pin counts

pin counts

• For compl

• For complete ete ete specifications specifications specifications see:

www.samtec.com www.samtec.com www.samtec.com?SADLSADL

High Speed Data Links High Speed Data Links High Speed Data Links

• 0,8mm pitch

• Terminates with Differential Pair high speed

• Terminates with Differential Pair high speed connectors and Flex Cable Jumpers connectors and Flex Cable Jumpers connectors and Flex Cable Jumpers

• 14 signal pairs

• Easily modified for custom pin counts, cable

• Easily modified for custom pin counts, cable lengths, guide posts and connector heights lengths, guide posts and connector heights

• High Speed shielded flex circuits

• Reversed end optional

• Mating ZIF (ZF5) and Q Pairs

• Mating ZIF (ZF5) and Q Pairs^®^®^®^®^®^® Interfaces Interfaces Interfaces Interfaces (QSE-DP) available

(QSE-DP) available

• For compl

• For complete specifications ete specifications see:see:

www.samtec.com www.samtec.com??ZFHFZFHF

High Speed Flex

SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SERIES SE

SE SE SE S S S S S S S S S S S S SE

SERIES SE

SERIES SERIES SE

SERIES SE

SE SE S S S S S S S S S S S S S S S S S S S S S S S S S S S S

SERIES SERIES SE

SE SE SE S S S S S S S S SE SE SE S SE SE SE S SE SE SE S SE SE SE S S S S S S S S S S S S S S S S S S S S S S S S S S S S SE

SERIES SE

SE SE SE S S S S S S S S SE SE SE S SE SE SE S SE SE SE S SE SE SE S S S S S S S S S S S S S S S S S S S S S S S S S S S S SER SER SER SER E SER SER SER SER SER SER SER SER SER SER

SERIES SERIES SER

SER SER SER SER SER SER SER SER SER ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI ERI RI RI RI RI RI RI RI RI RIE RIE RIE RIE SERIES RIE RIE RIE RIE RIE RIE RIE SERIES RIE RIE RIE RIE RIE RIE SERIES RI RI RI RI R R R R RIE RIE RIE RIE SERIES SERIES SERIES SERIES RIE RIE RIE RIE RIE RIE RIE RIE RIE RIE RI RI RI RI IES IES IES IES IES IES IES IES IES IES IES IES IES IES IES ES ES ES ES SERIES IES IES IES IES IES IES SERIES IES IES IES IES IES IES IES IES IES IES E EE E ES ES ES ES S SERIES S SERIES S SERIES S SERIES SERIES S SERIES S SERIES S SERIES S S S S S S S SERIES SERIES ES ES ES ES S SERIES S SERIES S SERIES S SERIES ES ES ES ES S S S

High Speed Flex

(14)

I/O Receptacles I/O Receptacles I/O Receptacles

• MiniPort

• MiniPort^™ Docking Port Receptacles Docking Port Receptacles Docking Port Receptacles (MPPD, MPRC Series)

(MPPD, MPRC Series)

• Mini USB, USB-A and USB-B Type connectors

• Male PCB mount USB connectors (USB-AM)

• Firewire Serial Bus meets IEEE 1394 (FSB)

• Single and ganged Modular Jacks (MODS, MODM)

• Very high density, fine pitch interconnects (VHDCI)

• High-Definition Multimedia Interfaces (HDMI)

• For complete I/O receptacle specifications see:

www.samtec.com/io/standard_products.asp www.samtec.com/io/standard_products.asp

Acclimate Acclimate™ ™ Acclimate™

Acclimate Sealed Sealed Circular Receptacles Circular Receptacles Circular Receptacles

• Meets IP68 requirements for dust

• Meets IP68 requirements for dust and waterproof sealing

and waterproof sealing

• Ethernet and USB

• Tiger Eye™ High Density Contacts

• Ganged RF connectors

• Power sockets

• Single or double ended

• Custom connectors and contact

• Custom connectors and contact systems available

systems available

www.samtec.com?SCRU www.samtec.com?SCRU www.samtec.com?SCRU www.samtec.com?SCRE www.samtec.com?SCRE www.samtec.com?SCRC www.samtec.com?SCRC www.samtec.com?SCR1 www.samtec.com?SCR1 www.samtec.com?SCR2 www.samtec.com?SCR2 www.samtec.com?SCR2

TM

High Speed Data Rate™

I/O Receptacles

• Ideal for high speed data transfer

• Ideal for high speed data transfer applications

applications

• Through-Hole or Surface Mount

• Edge Rate

• Edge Rate^™ contacts contacts designed for Signal Integrity

• Locking & Latching Features

www.samtec.com?HDMI www.samtec.com?VRDPC www.samtec.com?VRDPC

INTERCONNECT INTERCONNECT INTERCONNECT INTERCONNECT DESIGN GUIDEDESIGN GUIDEDESIGN GUIDEDESIGN GUIDEDESIGN GUIDE

Signal Integrity at any Distance

Cable-to-Board Board-to-Board

Panel-to-Board

Panel-to-Panel

INTERCONNECT INTERCONNECT INTERCONNECT

INTERCONNECT DESIGN GUIDE DESIGN GUIDE DESIGN GUIDE DESIGN GUIDE DESIGN GUIDE

S S

Signal Integrity at any Distance ignal Integrity at any Distance ignal Integrity at any Distance ™

High Speed Interfaces

for Board-to-Board, Cable-to-Board, Panel-to-Board and Panel-to-Panel applications.

for Board-to-Board, Cable-to-Board, Panel-to-Board and Panel-to-Panel applications.

for Board-to-Board, Cable-to-Board, Panel-to-Board and Panel-to-Panel applications.

Board-to-Board . . . .4-9

Cable-to-Board . . . 10-13

Panel-to-Board . . . 14

Panel-to-Panel . . . 15

Signal Integrity Support

development, simulation and testing of high speed systems for any application.

development, simulation and testing of high speed systems for any application.

development, simulation and testing of high speed systems for any application.

development, simulation and testing of high speed systems for any application.

Signal Integrity Services . . . .16-17

Final Inch ® . . . 18-19

0,635mm (.025"

0,635mm (.025"

0,635mm (.025"

0,635mm (.025"

0,635mm (.025") Pitch ) Pitch

Board-to-Board Board-to-Board Board-to-Board

0,8mm (.0315") Pitch ) Pitch

0,50mm (.0197") Pitch 0,50mm (.0197") Pitch 0,50mm (.0197") Pitch

Standard Stacking

Shielded & Rugged Shielded & Rugged

Shielded & Rugged Systems Systems

Mixed Technology Footprint Mixed Technology Footprint

Shielded & Rugged Stacking

Edge Rate Edge Rate Edge Rate

Contact System Contact System Contact System

Elevated High Elevated High Elevated High Density Arrays Density Arrays

Differential Pair Arrays

Right Angle Right Angle

Differential Pair Arrays Differential Pair Arrays Differential Pair Arrays

MEZZ

Board-to-Board Board-to-Board Board-to-Board

High Density Arrays

Open Pin Field Arrays

Rapid I/O XMC Connectors Rapid I/O XMC Connectors Rapid I/O XMC Connectors Rapid I/O XMC Connectors

One Piece Interfaces One Piece Interfaces One Piece Interfaces One Piece Interfaces One Piece Interfaces One Piece Interfaces

Open Pin Field Arrays Open Pin Field Arrays Open Pin Field Arrays Open Pin Field Arrays

Elevated Stacking

Elevated Riser Card System

Application Specific Application Specific Elevated Q Series Elevated Q Series

Horizontal & Perpendicular

High Speed Card Interfaces

Right Angle

Application Specific Edge Mount

Horizontal & Perpendicular

Horizontal & Perpendicular

Horizontal & Perpendicular

Data Rate ™ Cable Assemblies

Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board Cable-To-Board

Twinax Data Rate Twinax Data Rate Twinax Data Rate™

Twinax Data Rate™

Twinax Data Rate Cable Cable

Micro Coax Data Rate Micro Coax Data Rate™

Micro Coax Data Rate™

Micro Coax Data Rate Cable

Custom Data Rate Custom Data Rate Custom Data Rate Custom Data Rate Custom Data Rate™

Custom Data Rate™

Custom Data Rate Cable Assemblies Cable Assemblies Cable Assemblies

Board-to-Board Micro Coax Data Rate™

Coax Data Rate™

Coax Data Rate Cable

Custom RF Cable Assemblies Custom RF Cable Assemblies Custom RF Cable Assemblies

RF Panel & Board Mount RF Panel & Board Mount RF Panel & Board Mount Connectors

RF Cable Assemblies RF Cable Assemblies RF Cable Assemblies

& Components

& Components

& Components

Signal Integrity at any Distance ignal Integrity at any Distance ignal Integrity at any Distance ^™

Final Inch ^® . . . 18-19

Data Rate ^™ Cable Assemblies