• Nem Talált Eredményt

Technical Drawing in Photonics

N/A
N/A
Protected

Academic year: 2022

Ossza meg "Technical Drawing in Photonics"

Copied!
31
0
0

Teljes szövegt

(1)

Technical Drawing in Photonics

Lesson 4 Tangents.

Drawing of a parabola.

Drawing of a hyperbola.

TAMOP-4.1.1.C-12/1/KONV-2012-0005 project

„Preparation of the concerned sectors for educational and R&D activities related to the Hungarian ELI project”

Dr. Zsolt István Benkő

(2)

Technical drawing in Photonics

Tangent to a circle from a given external point

(3)

Technical drawing in Photonics Lesson 4

Tangent to a circle from a given external point

(4)

Technical drawing in Photonics

Tangent to a circle from a given external point

(5)

Technical drawing in Photonics Lesson 4

Tangent to a circle from a given external point

(6)

Technical drawing in Photonics

Common external tangent to two circles

(7)

Technical drawing in Photonics Lesson 4

Common external tangent to two circles

(8)

Technical drawing in Photonics

Common external tangent to two circles

(9)

Technical drawing in Photonics Lesson 4

Common external tangent to two circles

(10)

Technical drawing in Photonics

Common external tangent to two circles

(11)

Technical drawing in Photonics Lesson 4

Common external tangent to two circles

(12)

Technical drawing in Photonics

Common internal tangent to two circles

(13)

Technical drawing in Photonics Lesson 4

Common internal tangent to two circles

(14)

Technical drawing in Photonics

Common internal tangent to two circles

(15)

Technical drawing in Photonics Lesson 4

Common internal tangent to two circles

(16)

Technical drawing in Photonics

Common internal tangent to two circles

(17)

Technical drawing in Photonics Lesson 4

Common internal tangent to two circles

(18)

Technical drawing in Photonics

Common external touching circle to two circles

R

(19)

Technical drawing in Photonics Lesson 4

Common external touching circle to two circles

(20)

Technical drawing in Photonics

Common internal touching circle to two circles

R

(21)

Technical drawing in Photonics Lesson 4

Common internal touching circle to two circles

(22)

Technical drawing in Photonics

Drawing of a parabola (parabolic curve)

d

F

(23)

Technical drawing in Photonics Lesson 4

Drawing of a parabola (parabolic curve)

d

F

(24)

Technical drawing in Photonics

Drawing of a parabola (parabolic curve)

d

F

(25)

Technical drawing in Photonics Lesson 4

Drawing of a parabola (parabolic curve)

d

F

(26)

Technical drawing in Photonics

Drawing of a hyperbola (hyperbolic curve)

a c

F1 C F2

(27)

Technical drawing in Photonics Lesson 4

Drawing of a hyperbola (hyperbolic curve)

a c

F1 C F2

(28)

Technical drawing in Photonics

Drawing of a hyperbola (hyperbolic curve)

a c

F1 C F2

(29)

Technical drawing in Photonics Lesson 4

Drawing of a hyperbola (hyperbolic curve)

a c

F1 C F2

(30)

Technical drawing in Photonics

Drawing of a hyperbola (hyperbolic curve)

a c

F1 C F2

(31)

Technical drawing in Photonics Lesson 4

References

1. Ocskó Gy., Seres F.: Gépipari szakrajz, Skandi-Wald Könyvkiadó, Budapest, 2004

2. Lőrincz P., Petrich G.: Ábrázoló geometria, Nemzeti Tankönyvkiadó Rt., Budapest, 1998

3. Pintér M.: AutoCAD tankönyv és példatár, ComputerBooks, Budapest, 2006

Hivatkozások

KAPCSOLÓDÓ DOKUMENTUMOK

A plane can be denoted by two intersecting lines or by a line and a non-fitting point or by three not collinear points.... Technical drawing

If the point is fixed to the perimeter of a circle which rolls inside of an other circle then the trajectory is called hypocycloid.. If the fixed point is not on the perimeter of

„Preparation of the concerned sectors for educational and R&D activities related to the Hungarian ELI

„Preparation of the concerned sectors for educational and R&D activities related to the Hungarian ELI

This kind of projection is a compromise: the correct values can be measured parallel to an axis and it gives a good image of the objects in a single view but all

on the same drawing every engineer can have his/her own – password protected – layers to do his/her task without interfering with the others.... Technical drawing in Photonics

- To present and process the structure, organisation, and mission of MINURSO; to draw conclusions for the personnel of the Hungarian Defence Forces involved in mission activities;

The Hungarian Central Statistical Office is in charge of the professional supervi- sion of the (local) preparation and execution of the census; provides the technical conditions of