18 eredmény a kulcsszóra: 'carbon fiber reinforced plastics'
• to produce basalt, glass and carbon fiber reinforced composites with thermoset matrix material, investigation of mechanical properties and comparing each other, moreover
N/A
Mohan et al., identified, by using Taguchi’s optimisation method, that the lowest delamination factor occurred when lower feed rate and higher spindle speed were used on
N/A
Summary: In our research, we investigated how electric current connected to multifunctional carbon fiber would affect the dynamic mechanical properties of the polymer
N/A
I proved that the presence of 0.5 wt% graphene increases the static interlaminar shear strength of carbon fiber reinforced pCBT matrix composites, since the propagating
N/A
Chiu, „Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills”, Int. Tools
N/A
The fiber reinforcement was ensured by 3, 4, 5 or 6 laminations of twill of carbon fiber (each lamination had the same 200 g/m2), embedded into epoxy resin. The standard flat
N/A
Abstract: Concrete beams reinforced with glass fiber-reinforced polymer bars exhibit large deflections and crack widths compared with concrete members reinforced
N/A
Prasse et al. [61] also studied the electric resistance change of carbon fiber during cyclic loads. This is caused by the cracks formed while loading-up, which then
N/A
Fiber related processes, like fiber breakage, pullout or buckling may also take place in short and long fiber reinforced composites. As mentioned earlier the principle of
N/A
Összefoglalás Bevezetés: A HELLP szindróma Haemolysis, Elevated Liver enzymes, Low Platelet count a praeeclampsia súlyos, életveszélyes formája, amelyet a jellemző laboratóriumi
N/A
Based on the examinations, it can be stated that the distribution of the length of protruding fibers is quite similar (Fig. 8), and the expected values of distributions
N/A
We analyze the relations of three coefficient conditions of different type implying one by one the absolute convergence of the Haar seriesJ. Furthermore we give a sharp condition
N/A
Tensile specimen before failure (a), breakage of the carbon fiber bundle (b), breakage of the glass fabric (c), change in resistance of the carbon fiber bundle as
N/A
1 The authors would like to thank Károly Szász, the former President of the Hungarian Financial supervisory Authority (Pénzügyi szervezetek Ál- lami Felügyelete, hereinafter:
N/A
oket, b´ armit jelentsenek is ezek a kifejez´ esek), ´ıgy a fizikusok folytonosan keresik a komplex Hadamard-m´ atrixok ´ uj csal´ adjait. Physics cikkeire hivatkozik, ´ es
N/A
Various parametric studies were performed to study the effect of core thickness, aspect ratio and boundary conditions and it was shown that natural frequencies of uniform
N/A
In order to compare the effectiveness of the crack delocalization and fiber bridging (PBO) versus fiber pull-out mechanisms in Kevlar reinforced composites [35], the relative frac-
N/A
The e ff ects of steel fiber strength on the mechanical properties of steel fiber reinforced concretes, such as compressive strength, modulus of elasticity, splitting tensile
N/A